We received a call from a homeowner who's home still had the original roof on it, and would like to look into other roofing options instead of the traditional asphalt shingles. 

When we met with Leah, we discussed several options for roofing and came up with a solution for her. She's was thrilled to have such clear communication since a roof replacement can be a scary task. 

Remove all existing layers of roofing on home and install 1/2 fiber board on roof surface. Ice & water protective rubber will be installed 36" on eaves, valleys, chimneys, skylights and low pitches. GAF Tiger Paw will be installed on entire roof surface. During installation vent pipe boots will be installed. Install GAF Cobra vent where needed (remove vent fan). Install EPDM roofing system to entire roof and wrap with white metal edging. Re-flash chimney using 16 oz. copper (2 in total), dumpster will be provided by Smart Care Exteriors. Clean up and debris removal at the end of each shift 

A homeowner called asking if we can come out and inspect the gutter system on his home before the upcoming Fall season. He wanted to ensure of proper pitch, drainage and overall maintenance. 

Solution: Replace front gutter on home with a new 5" white (re use leader), inspect remainder of gutters/leaders for missing screws (replace where needed), end caps, miters, pitch etc. Clean entire gutter system once inspected, and repair fascia board.

This Monroe homeowner called stating she needed new flashing around her windows and vinyl siding due to some leaks she's noticed. When Smart Care went out to her and spoke to her regarding her concerns along with some other findings we came up with a solution.

Solution: Remove all vinyl siding on rear of home from deck to roof, inspect sheathing and trim board around windows & sliding door for possible rot (from water penetration). Silicone will be applied around slider and each window for protection. Wrap ice & water protective 2 ft around all areas of slider and windows. Reinstall siding and replace any damaged. Remove shingles around chimney, install new copper step flashing around chimney (using 16 oz. copper). Reinstall shingles around chimney with best matching color to existing. Add copper to chimney once re flashed and water proof as well.